The mobile phone usb data cable connector is broken, how to connect the mobile phone to continue to use

Mobile phone usb data cable connector is broken How to connect the phone to continue to use? Mobile phone usb data cable is mainly used for data line transmission and charging. Due to the long-term use and bad habits of the mobile phone usb data cable, it is easy to cause the mobile phone usb data cable connector to be disconnected. It happens that the mobile phone just has no power and is eager to charge. When the mobile phone usb data cable is replaced, the mobile phone usb data cable is broken, how to connect the mobile phone to continue to use can solve the emergency.
 

 

The usb data cable of the mobile phone generally has four wires, two power cables and two signal wires. The red, white, green and black are standard wiring colors, corresponding to 1, 2, 3, and 4 pins, respectively, and the four wires are respectively 1 - Power 2 - Data 3 - Data 4 - Power, the general arrangement is: red, white, green and black from left to right.

When the usb data cable connector is disconnected, we need to connect according to the color of the cable. It should be noted that the power cable should not be reversed, otherwise the USB device or the computer chip will be burned, but it is recommended. Direct replacement of one, after all, there are security risks.

The following describes several mobile phone usb data line protection methods:

One. When the mobile phone usb data cable is plugged in, try to be gentle. Do not pull the data cable body directly. It is easy to damage and cause breakage. The position of the cable head should be pulled.

Two. Since the skin of the usb data line is gelatinous, it is necessary to avoid close to the heat source to avoid thermal expansion and contraction, and the number of times is broken.

three. Install the spring-protected interface to avoid damage to the connector due to pulling.

Four. The tape is wrapped around the interface, which is simpler and more convenient than the spring is not easy to handle and requires additional processing.

Fives. Using a hose to cover the mobile phone usb data cable is easy to break the place, and there is another layer of protection on the outside of the cable, which acts as a buffering bending force, which can extend the service life of the cable.

I hope that through the above methods can better protect your mobile phone usb data cable, and at the same time, for the mobile phone usb data cable connector is broken how to connect the mobile phone to continue to use this practice, Yongchuangda usb data cable manufacturers recommend not to try easily After all, it is an electronic product, there are certain risks, so as not to lose more than gains.